Washing, drying time, temperature control Music in Japan

General characteristics of fabric, such as the heat sensitive plants must strictly control the drying temperature, drying temperature must be lower than the sensitive temperature 5 - 10 ℃, and the fabric that is not sensitive to heat can be set high drying temperature at 70 ℃ in general. Is to classify all kinds of fabric is introduced:

1, the wool

features: a, wool is sensitive to alkaline solution, and for the weak acidic solvent is not affected by the too big, good stretching resistance, high elasticity and heat preservation, easily affected by the way, there is a big return. Drying processing must be used, but at 105 ℃ ( 225 degrees Fahrenheit) When will become fragile. Pressure, humidity and heat will make woollen permanent deformation, usually also very easy to deformation. Wool of daily maintenance should pay attention to shrink, waterproof, prevent oil, moth-proofing. White wool also note yellow.

b, rag wool, the wool fabric apart also repeated use. But in the loom, weaving workers and clothing manufacturers will cause a lot of waste.

features: short fiber than trim wool, flexibility is poor; Main component is broken into fibrous tissue. Usually can be spun into thread.

features: easy to wrinkle, easy dyeing, easy to dirty, don't acid-proof alkali, bleaching, almost no elastic, easy to wash. Through processing can be more anti-wrinkle, waterproof, prevent oil, abrasion resistance and wash and wear, etc. , can also be made by soda solvent mercerizing ( Stretch processing at the same time to increase the gloss effect) 。 Usually with man-made fibers ( Polyester fiber) The blended.

2, flax linen feature: it is extremely strong, sensitivity to acid, alkali not people are, very guanghua, little wrinkle. Once the heat preservation, poor crease it is difficult to restore.

3, silk properties: the vice of predatory solvent is very sensitive, but the weak acid is almost unaffected. Very soft, light, such as weight, tear won't fold, but blockbuster shinji is highly affected by the perspiration; Shinji is very elastic and glossy.

4, polyurethane ammonia ester fabric characteristics: good elasticity and stretching, is three times its original length. Exposure to oil, grease, water and sunlight are not sensitive.

5, viscose fabric features: be affected with damp be affected with damp is not extended, it is easy to shrink, but through the ironing process can enhance the shrink resistance and crease resistant ability. Is sensitive to acid, alkali is not very sensitive.

6, cellulose acetate fabric features: warmth retention property good, good crease recovery, easy expansion, easy to dry. The scouring agent ( Acetone thinner, etc. ) And alkali sensitivity. At 160 ℃ ( 320 degrees Fahrenheit) When the melt.

7, polyamide ( Nylon) Fabric $p $features: very good scalability, easy to wear, high elasticity, easy expansion, easy to dry. Alkali resistant and corrosion resistant, is sensitive to acid. Easy to turn yellow, ironing temperature not too high.

8, polyester fabric properties: excellent scalability, wear resistance, high elasticity. Is a corrosion and acid, do not fade. Basic don't absorption of moisture, has good heat resistance. Often with wool or cotton blended.

9, polypropylene fabric properties: excellent scalability and resistance to wear, do not fade, acid and alkali, are sensitive to heat. Swelling is poorer, prone to electrostatic phenomena. In warm and humid environment for a long time, easy to deformation

$p $10, poly chloride fabric features: the acid, salt, corrosive materials, water, and is not sensitive bacteria. Is sensitive to heat, In the 60 - 70 ℃ which is 140 - 158 degrees when they returned to shrivel) 。 Solvent temperature more than 30 degrees Celsius can result in shrinkage and expansion. Do not fade, almost non-flammable, electrostatic occur easily.