Suit - pressing to avoid problems Music in Japan

A suit to the dry cleaner after wash is not just a matter of the, when wanting to make a suit to wear a crisp, often without with a hot iron very hot after washing. Ironing, there is also a trick, however, must first spray some water on the clothes, and even on the lining, a layer of wet cloth before ironing them. If you bring a piece of dry clothes is very hot, not only can't fold hot formation, but also easy to put up the clothes to be burned.

when clothes spray some water on the fiber wetting by water soon. When the temperature of iron on a very hot, right into the water is heated in fiber vaporization. We know that the substance from a liquid into a gas, to absorb a large amount of heat from the surrounding, and the volume increase many times in a flash. Because the iron on the above, the volume expansion of water vapor to run not to come out, only hard to drill into the fiber gap, this drill, just put the fiber packed straight and flat.

the temperature of the ironing clothes to master good iron. If the iron temperature is too low, the moisture can't gasification, natural not & other; Hot & throughout; The role of; If the temperature is too high, will scorch her clothes. Experienced people, know to drop a little water on the iron base, according to the change of water droplets and the sound to determine the temperature of the iron.

if the droplets issued & other; The flapping ji & throughout; Noise, and water roll, fast flow, can be concluded that the iron temperature is about 150 ℃ or so, just right; If water droplets issued & other; Sloped & throughout; Noise, and water droplets quickly spread and evaporates into gas, iron temperature is about 180 ℃ or so right now, is too high. At this time, as long as the spray water appropriately, can reduce the temperature to 150 degrees.

this sudden heated vaporization liquid volume dramatic expansion of phenomenon, in the daily life and production, is often the advantageous to use, should pay attention to prevent the harmful. In steel mills, for example, hot steel slag is forbidden in wet place, otherwise it is planted a time bomb.

because of the hot steel slag, a fall in damp places, the ground water will be vaporized immediately, the volume of it in a short period of time, it can be increased more than 1000 times, however, a large number of steel slag pressure on the hover, ran out of steam cannot smoothly, in the long run, is piling up, finally he broke through steel slag & other; Bang & throughout; He exploded. This, of course, is very dangerous, so, must pour the steel slag in a dry and no flammable, to ensure safety. The author: