Washing powder OEM explains how to identify the quality of washing powder

The washing powder OEM explains how to identify the quality of washing powder: (1) Look at the color of high-quality washing powder, the color is uniform and the whiteness is good; if it is color-added washing powder, the tone should be uniform and soft. Such as uneven color, mixed with black, yellow or other variegated powder, or wet mass, coke lumps, etc., are inferior products. (2) The particle size of washing powder with good particle size is generally about 0.5 to 0.8 mm, and it is uniform, without moisture absorption and agglomeration. If the particle size is uneven and the thickness is very different, especially if there are many coarse particles, it is a defective product. (3) Smell The chemically synthesized and properly handled washing powder has a refreshing inherent smell, and some washing powders with spices can emit a pleasant fragrance; if the smell is abnormal or has a pungent smell, it is an inferior product. (4) Look at the solubility. High-quality washing powder can dissolve well in water without leaving any particles; if it has insoluble substances in water, it is either defective or adulterated. (5) It seems that the high-foaming washing powder with detergency should have rich foam, strong detergency, easy to rinse, and the washed clothes will not be hard after drying; low-foam washing powder has less foam in water, dissolves quickly, and has strong detergency. . Those that have the above two names of washing powder but do not have their characteristics may be fake and inferior products. (6) Look at the packaging. Some criminals use bulk washing powder mixed with talc powder, calcium carbonate powder, etc. to repackage and sell to deceive consumers. Therefore, pay attention to identification when purchasing washing powder. High-quality washing powder is generally packaged in a regular manner, neatly printed, with bright and clear handwriting and patterns, and the color is not easy to fall off; if the packaging is irregular, the seal is not flat, the printed handwriting or pattern trademark is vague and irregular, and the color is easy to fall off, it may be a fake and inferior product. The above is the introduction of washing powder OEM on how to identify the quality of washing powder. Welcome to inquire: https://www.jingliang-pod.com/