Wool fabric fade? Many other people have the clothes shrink and clothes fade. Sometimes, a do not pay attention to, a brand new dress will be because of problems such as shrink and faded instantly become & other; Scrap & throughout; , in addition to helpless, is a sigh. So do you have any tips, can prevent the clothes shrink and faded? Now the author will introduce several brief and practical method, might as well give it a try.
1, the wool fabric fulling fade
reasons: excessive moisture content in the dry cleaning solvents, especially in the washing wool, cashmere, Angola interlock when clothings.
prevention and solution:
( 1) In the process of scouring, avoid adding excess water.
( 2) Using high quality dry cleaning agent, keep moisture in the dry cleaning oil instead of fabric.
( 3) If possible or conditions permit, should advance dry wet clothing, remove the natural moisture.
( 4) If possible, wool fabric together to clean.
2, chemical fiber fabric shrinkage or brittle
reason: strengthening agent is contained in PVC, or cloth contained polypropylene dissolved in solvent and degeneration.
the solution:
( 1) Should not be dry-cleaned PVC or polypropylene fiber clothing.
( 2) Pay special attention to the clothing label & other; Hybrid fiber & throughout; Clothing, this table may contain polypropylene.
( 3) Should check before dry cleaning with polypropylene ( Polypropylene fiber can float on the surface of the water) 。
( 4) In the event of contraction brittle unrecoverable.
( 5) Dry cleaning after milling by hot steam, use wool fabric, the tensile processing.
3, curtain fabric shrinkage
reason: relaxation retraction. Because the curtain fabric, such as when the manufacture is in a state of tension, dry cleaning will make its bounce back to its original size.
the solution:
( 1) Remind customers retraction may occur.
( 2) With tensile and means to make its restore to its original size.
4, acrylic ester, or modified acrylic ester fabric shrinkage
the reason: the drying temperature is too high.
the solution: baking process, ensure the export air temperature not to exceed:
( 1) 50 ℃ acrylic esters.
( 2) 40 ℃ modified acrylic esters.
Contact us
Phone: +86 17796067993
Email: jingliangweb@jingliang-pod.com
Address: Room 101, 1st Floor, Building 1, No. 77-3, Datangyuan Area A, Central Science and Technology Industrial Zone, Sanshui District, Foshan City